P371E BMW Fault Code
Check P371E OBD Fault Code ReasonCatalytic converters must be warm before they can work properly. On a cold start the PCM provides a rich mixture to keep the cold engine running.
All that extra fuel goes into the catalytic converter. But the exhaust isn't very hot, because, ah, the engine is pretty cold. GM has employed several strategies to fire up the catalytic converter quicker and reduce cold start emissions. One way is to use a secondary air pump that pumps outside air directly into the catalytic converter.
P371E Code Symptoms :
![See P371E in engine](../obd/9.jpg)
OBD P371E code and tailpipe testing are two different approaches to identify vehicles in need of repair. The OBD system looks for broken or malfunctioning emissions control components and P371E, while tailpipe tests sample a vehicle's exhaust to see if it is above or below certain prescribed limits. Given the robust nature of today's emissions control components, it is entirely possible for an individual component to malfunction without leading to an immediate increase in emissions at the tailpipe.
In such cases, other components (like the catalyst) can temporarily compensate for the part that is broken however, these other components can only do double duty for so long before they, too, begin to malfunction. In addition, OBD also monitors for and other malfunctions in the fuel system problems that traditional tailpipe tests were not designed to identify. Most state and local areas also include a gas cap pressure test as part of an emission inspection.
Diagnosis And Repairing P371E
P371E OBD 2 code on vehicles with electronically controlled automatic transmissions, the 3-4 shift solenoid is responsible for actuating the hydraulic circuits to activate clutches or bands that change gears inside the automatic transmission.
How to fix P371E code ?
![See P371E repair manual](../obd/3.jpg)
- Air fuel ratio (A/F) Sensor 1 Bank 1 harness is open or shorted
- Faulty Fuel injector
- Camshaft Position Sensor harness is open or shorted
- Missing or loose fuel cap
Some systems require that the actuator has an adequate supply of brake fluid. Low brake fluid levels can mimic the symptoms of code P371E, so consult the manual to locate the brake fluid reservoir.
Bear in mind that a low fluid level can set code P371E on some applications, so make sure that on fluid operated systems the fluid level is up to the mark before starting an electrical diagnosis.